1200W HF/6m LINEAR AMPLIFIER KIT (3 BOARDS) FOR LDMOS BLF188XR MRF1K50 MRFX1K80

Description

DX WORLD-e
1200W LDMOS HF/6m LINEAR AMPLIFIER KIT
KIT INCLUDE 3 BOARDS ASSEMBLED AS IN PHOTOS:
-1200W HF/6m LINEAR AMPLIFIER BOARD FOR LDMOS
-LPF FILTERS 160-6m
-RX/TX AND ANTENNA SWITCH BOARD
NOTE: CONTACT ME IF YOU WANT TO ADD PROTECTION BOARD FOR LDMOS
_______________________________________________________________
LDMOS HF 1.8-54MHz LINEAR AMPLIFIER BOARD 1200W
USE FOR LDMOS  BLF188XR / MRF1K50 / MRFX1K80
RF INPUT: 0-8W MAX
RF OUTPUT: 0-1200W
UP TO 1500W WITH MRFX1K80 57-60V  35A POWER SUPPLY
FREQ:1.8-54MHz
POWER SUPPLY: 48-60V 35A
SIZE: 70x100mm -   38x100mm
___________________________________________________________________
LPF FILTERS 160-6m BOARD
IN /OUT 50 OHM
POWER THROUGH LPF 1500W MAX SSB/CW
POWER SUPPLY 12-14V
7 POSITION:
160m
80m
60/40m
30/20m
17/15/12m
11/10m
6m
BOARD SIZE: 240x160mm
___________________________________________________________________
RX-TX AND ANTENNA SWITCH BOARD
Freq: 1-80MHz
Max power through unit 1500w pep
Power supply 12-14V
THIS BOARD IS TO SWITCH AMPLIFIER BETWEEN TRANSMIT AND RECEIVE FOR USE WITH TRANSCEIVER.
ALSO HAS 2 ANTENNA SWITCH THAT YOU CAN USE.
ON BOARD CONNECTIONS:
-TRX IS TO CONNECT THE TRANSCEIVER
-AMP IN IS TO CONNECT TO RF INPUT OF AMPLIFIER
-AMP OUT IS TO CONNECT FROM AMPLIFIER OR LPF IF USED OUTPUT.
-ANT1 IS ANTENNA 1 CONNECTION
-ANT2 IS ANTENNA 2 CONNECTION
-+12V IS TO SWITCH BETWEEN ANT1 AND ANT2 (ANT1 IS DEFAULD WITH NO VOLTAGE).
-RX LED IS TO CONNECT INDICATOR LED LIGHT FOR RECEIVE
-TX LED IS TO CONNECT INDICATOR LED LIGHT FOR TRANSMIT
-BIAS OUT IS PROVIDE 12-14V DURING TX ONLY TO CONNECT ON AMPLIFIER BOARD BIAS IF DESIRED.
-PTT IS TO CONNECT RCA JACK FOR PTT KEY FROM TRANSCEIVER
ON BOARD TEST BUTTON IS TO PRESS TO ENABLE TX MANUAL TO CHECK BOARD/CONNECTIONS.
BOARD SIZE: 95x70mm
______________________________________________________________
PRINTED SCHEMATICS AND INFORMATION GUIDE INCLUDED
ANY OTHER INFORMATION YOU NEED CONTACT ME
SV2RIF
SV2RKF
THANK YOU